Posts tagged ‘barack obama’
The other day i got a Proxima Ultralight LS1 projector with a broken bulb for 20 dollars. After tearing it apart i found the bulb check control lines coming out of the ballast board. These lines check to see if there is a bulb in the projector. After bridging the +3.5v pin and the Return pin on the corresponding plug on the main control board, the projector thought there was a bulb in the unit. After Buying a 50w Mr16 halogen bulb (6 dollars) here from walmart, i built a custom bracket(see pic two).The bulb bracket was built out of a old cd drive case. The bulb runs of twelve volts. Using a old computer power supply (picture 4), i bridged the green wire and ground on the 20 pin atx connector(on the Power supply). This tricks the power supply into thinking a motherboard is connected to the power supply. After connecting the bulb to the yellow and black pins on the standard 4-pin hard drive connector (picture 5) on the power supply, it lit up the bulb. 50 watts isnt a lot, but it was still very bright. The bracket connects to the cover of the Light Bulb port, which is a perfect spot to connect. The replacement bulb runs about 5 times cooler than the original, so no extra cooling is required. The only problem is brightness. Although this bulb was sufficient, seeing small details were difficult. I am eventually going to buy another bulb that is 100 watts. If anyone is going to follow this idea, i would strongly recommend a 100 watt bulb.
No images of it working, but i’ll try to post some tomorrow when i clean the dust of the internal lenses.
Working image at bottom!!!!!!
The Cable shown in this picture is the one i bridged. The cable goes between the Bulb PSU and the control board.
Talk to you all later.